STUDIO

MTC

Monitor & Talkback Controller

The MTC is the complete monitoring solution. Source and loudspeaker selection, mono, dim and mute switching functions, talkback with built-in talkback microphone up to the creation of a headphone mix for the artist.

Inputs

The MTC offers six stereo inputs. The Musician input should preferably contain the musician’s signal, so that this signal is also available at the Musician control in the Cue Mix section.

The Mix input is then intended for the DAW’s master output. Musician and Mix and 2TrA and 2TrB are balanced input stages.

A mono signal should always be fed into the left channel to be heard on both channels in the phantom center.

2Tr C and 2Tr D are unbalanced and have RCA connectors. HiFi equipment can also be connected here.

All inputs are additive! The MTC mixes all input signals together.

The slave out stereo output always carries out the selected input signal(s) (except Musician) unprocessed. Among other things, metering can be connected here.

Cue Mix

As an individual mix of Musician signal and Mix signal, an analog, latency-free Cue Mix can be created for the musician.

For each of the three artist statements: “I can’t hear myself”, “The mix is too loud” and “I can’t hear anything”, there is a dedicated control as an answer.

At the back, the Cue Mix can be sent to a headphone amplifier in the vocal booth.

Talkback

A built-in electret microphone is available for talkback communication, which can either be activated with the Talk button or remotely controlled via a foot switch.

The level control sets the correct level for the microphone signal.

At the Talk Out output only the talkback microphone signal is send out via a balanced jack socket.

The sound engineer can thus speak directly to the speakers or musicians via an active loudspeaker placed in the recording room.

Control Room

Three pairs of loudspeakers can also be operated in parallel on the MTC.

The volume is controlled by an analog potentiometer and a 45mm full aluminium knob.

With the Source Blend control an optimal monitor mix can be created quickly.

The headphone output can be used to listen in parallel to the selected speaker pair. 

The headphones are switched on or off with the HP On switch, so that they can remain plugged in even if they are to be muted.

Play Video
Rob Tavaglione takes a look at the MTC in Pro Audio Review
Play Video
Jim Pavett gives an MTC overview in pure wave audio

Reviews

Resolution
Sound On Sound
Music & PC
Bonedo
Audio Fanzine
Soundmaker

MTC Blog Posts

Other Stereo Monitor Controller

Phonitor 2
Phonitor 2
Headphone Monitoring Amplifier
2Control
2Control
Stereo Monitor Controller
Volume 2
Volume 2
Stereo Volume Controller
Marc One
Marc One
Monitoring and Recording Controller
Control One
Control One
Monitor Controller

Multichannel Monitor Controller

MC16
MC16
16-channel Monitor Controller
SMC 7.1
SMC 7.1
7.1 Surround Monitor Controller
SMC
SMC
Surround Monitor Controller
Volume 8
Volume 8
8-channel Volume Controller

Manuals

Specifications

Analog inputs & outputs; XLR & TRS Jack (balanced), RCA

Maximum input gain (XLR, Jack)
21 dBu
Maximum input gain (RCA)
19 dBu
Input impedance (Jack)
50
Input impedance (RCA)
10
Output impedance (XLR)
100 Ω
Common mode rejection (1 kHz)
70 dB
Frequency range (-3 dB)
10 Hz – 100 kHz
THD +N (10 Hz – 22 kHz, 0 dBu)
0.005 %
Noise (A-weighted)
-89.4 dBu
Dynamic range (XLR, Jack)
110.4 dB
Dynamic range (RCA)
108.4 dB

Internal Linear Power Supply with Toroidal Transformer

Operating voltage for analog audio
+/- 15 V
Operating voltage for relays and LEDs
+12 V

Mains Power Supply

Mains voltage (selectable)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V
T 315 mA
Fuse for 115 V
T 630 mA
Power consumption
max. 10 W

Dimensions & Weight

W x H x D (width x height x depth)
272 x 91 x 220 mm
10.71 x 3.58 x 8.66 inch
Unit weight
2.3 kg
5.07 lbs
Shipping weight (incl. packaging)
3.6 kg
7.94 lbs

Reference: 0 dBu = 0,775V. All specifications are subject to change without notice.

Events

Due to Covid19 there are no events scheduled at this time.

What does it actually mean …

In Stock!

The product is in stock in our warehouse in Niederkrüchten, Germany, and will be shipped the same or next working day.

We process the orders after receipt of the order and update the stock in the online shop regularly. If the product is no longer available at short notice due to high order volume, you naturally have the right to withdraw from the purchase (see Right of Withdrawal).

In any case, you will receive an e-mail with details of the delivery and the estimated delivery time.

Available soon!

The product is not in stock in our warehouse in Niederkrüchten, Germany. Usually it will be available again within 5 working days.

In any case, you will receive an e-mail with the details of the delivery and the estimated delivery time.

Of course you have the right to withdraw from your purchase (see Right of Withdrawal).

Product Condition

A-Stock

Brand-new product from the current product portfolio.

B-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and full warranty.
Only slight to no signs of use.

C-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and legal warranty.
In some cases clear signs of use, which are documented in photos.

NOS

"New Old Stock"
After discontinuation of a product still available new products with full warranty.

Login