Phonitor One

The Audiophile Headphone Amplifier

with innovative Phonitor Matrix and outstanding sound quality.

number one in sound

For us the sound is always in the foreground. When it sounds good, we like to listen. To get such a sound, you need experience and technical finesse. We have incorporated both into the Series One.

The Design Of The Amplification Stages

The Preamplifier Stage

Two Burr-Brown OPA 2134 SoundPlus™ operational amplifiers provide the pre-amplification. These are specially designed for audiophile circuits and are characterized by extremely low noise and minimal distortion of only 0.00008%.

Thanks to a true FET stage, the OPA 2134 achieves a slew rate of 20V/µs, making it a high-speed operational amplifier. This has an immediate positive effect on the liveliness of the playback.

In addition, low capacitance film capacitors are installed in the signal path as bypass capacitors of the coupling capacitors, which ensures a more precise transmission of the high-frequency signal components.

The excellent Panasonic ‘Electric Double Layer’ gold electrolytic capacitors are used as coupling capacitors. They offer the highest storage capacity of all capacitor technologies.

The Power Amplifier

The output stage of the headphone amplifier is designed as a push-pull amplifier in class AB mode. The bipolar transistors share the amplification of the positive and negative half-waves, which produces a higher gain and a higher output voltage than in Class A operation, where only one transistor amplifies both half-waves.

The output stage transistors are thermally coupled and thus run particularly coherently, which contributes to a consistent and stable sound image.

The power supply has a buffer circuit with low source resistance, ensuring generous current reserves even when operating low-impedance headphones.

The Revolution

in the headphone amplifier is the Phonitor Matrix, with adjustable crossfeed, thanks to which you can create mixes with headphones that sound the same on speakers.

The Phonitor Matrix in its largest expansion stage has three setting parameters: Crossfeed, Speaker Angle and Center Level. 

In the Phonitor One, the center level is preset to -1 dB and the speaker angle to 30°. These are the most commonly used values.

The crossfeed function determines the crosstalk of the channels, the so-called interaural level difference. The intensity of the crossfeed is fully variable. 

At the beginning of the control path the function is not in the audio path. It is only switched on by adding it via relay (hysteresis circuit). The audio signal therefore does not pass through the crossfeed stage if this is not desired.

Conventional
Phonitor Matrix
Correct
Play Video
Everything you need to know about the Phonitor Matrix
Play Video
Everything you need to hear about the Phonitor Matrix

Two Line Inputs

Two analog stereo inputs can be connected to Phonitor One. 

Sources such as a DA-converter, CD-player, mixer, synthesizer or an analog tape machine/tape deck can be connected to the analog line inputs either balanced (TRS jacks) or unbalanced (RCA).

If you want to connect your computer, tablet or phone directly, check out Phonitor One d with USB input and a state-of-the-art 32-bit DA-converter.

The Power Supply

Good sound always starts with the power supply. This is where you lay the foundation for the performance of the entire device.

Although we “only” supply a 12 V plug-in power supply unit, the secondary power supply inside generates a voltage level of +/-17 Volts for the analog audio sections with which professional levels of up to +22.5 dB can be achieved!

An elaborate low-drop operating voltage regulation provides more “juice” and regulates cleanly even when the maximum operation voltage is reached.

The Phonitor One delivers full power when used with the included 1.5 A power supply. Only use the 12 V plug-in power supply unit within the scope of delivery. The ON-switch puts the Phonitor One into operation.

Manual

Comparison Chart

Specifications

Analog inputs; 6.35 mm (1/4") TRS Jack (balanced), RCA

Input gain (max.)
+22.5 dBu
Input impedance Line In 2 (balanced)
20
Common mode rejection
< 60 dB
Input impedance Line In 1 (unbalanced)
47

Headphones Output; 6.35 mm (1/4") TRS Jack

Wiring
Tip = Left, Ring = Right, Sleeve = GND
Source impedance
20 Ω
Frequency range (-3 dB)
10 Hz - 200 kHz
Noise (A-weighted, 600 Ω)
-97 dBu
THD + N (0 dBu, 10 Hz – 22 kHz, 600 Ω)
0,002 %
THD + N (0 dBu, 10 Hz – 22 kHz, 32 Ω)
0,013 %
Max output power (600 Ω)
2 x 190 mW
Max output power (250 Ω)
2 x 330 mW
Max output power (47 Ω)
2 x 400 mW
Fade-out attenuation (600 Ω)
-99 dB
Crosstalk (1 kHz, 600 Ω)
-75 dB

Internal Power Supply

Operating voltage for analog audio
+/- 17 V
Operating voltage for headphone amplifier
+/- 19 V
Operating voltage for relays
+12 V

External Power Supply

AC/DC switching adaptor
Mean Well GE18/12-SC
DC plug
(+) pin 2.1mm; (-) outside ring 5.5mm
Input
100 - 240 V AC; 50 - 60 Hz; 0.7 A
Output
12 V DC; 1.5 A

Dimensions & Weight

W x H x D (width x height incl. feet x depth)
210 x 49,6 x 220 mm
8,23 x 1,95 x 8,66 inch
Unit weight
1,40 kg
3,09 lbs
Shipping weight (incl. packaging)
2 kg
4,4 lbs

Reference: 0 dBu = 0,775V. All specifications are subject to change without notice.

Events

Due to Covid19 there are no events scheduled at this time.

What does it actually mean …

In Stock!

The product is in stock in our warehouse in Niederkrüchten, Germany, and will be shipped the same or next working day.

We process the orders after receipt of the order and update the stock in the online shop regularly. If the product is no longer available at short notice due to high order volume, you naturally have the right to withdraw from the purchase (see Right of Withdrawal).

In any case, you will receive an e-mail with details of the delivery and the estimated delivery time.

Available soon!

The product is not in stock in our warehouse in Niederkrüchten, Germany. Usually it will be available again within 5 working days.

In any case, you will receive an e-mail with the details of the delivery and the estimated delivery time.

Of course you have the right to withdraw from your purchase (see Right of Withdrawal).

Product Condition

A-Stock

Brand-new product from the current product portfolio.

B-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and full warranty.
Only slight to no signs of use.

C-Stock

Demo, exhibit or return item.
In original packaging, incl. manuals and legal warranty.
In some cases clear signs of use, which are documented in photos.

NOS

"New Old Stock"
After discontinuation of a product still available new products with full warranty.

Login