STUDIO

MixDream XP Mk2

The puristic summing mixer with Class A technology.

As an analog 16-in-2 Class A summing device, MixDream XP Mk2 offers impressive sound quality and brings together single tracks in a musical way. The spatial depth of the stereo stage and the harmonic coherency of the summed signals make mixing through an analog summing device a very special experience.

The Mk2 generation of the MixDream XP offers the same outstanding audio quality as its predecessor thanks to the internal audio operating voltage of +/-30 V. In addition to the new design and an even better feel, the MixDream XP Mk2 offers another new feature: the individually switchable -18 dB level attenuation for the last four stereo channels. This is how the analog summing gets the best out of every mix!

Analog Summing

Analog summing with the MixDream XP Mk2 brings intense depth, precise localisation and impressive spatiality. Individual instruments mix with smooth transitions. 

AD/DA converter and monitor controller are not included in the scope of delivery. Within the illustration, the products SPL Madison (AD/DA converter) and SPL MTC Mk2 (monitoring controller) are shown. Audio cables are not included in the scope of delivery.

For the analog summing, individual tracks from the computer are sent via D/A converters into the MixDream XP Mk2. These are summed in the MixDream XP Mk2 and then recorded again as a stereo signal via an A/D converter in the DAW software.

The MixDream XP Mk2 is designed for stereo summing of up to 16 audio tracks in the analog domain. In combination with digital production systems, the advantages of analog and digital techniques can thus be ideally combined: digital convenience is complemented by the sound quality that until now only the best analog consoles have been able to deliver. Conceptually, the reduction to high-quality analog summing without panorama controls and faders offers the great advantage of being able to retain the entire scope of computer automation.

So when using the MixDream XP Mk2, the usual workflow with the DAW does not have to be changed, all techniques and options of a DAW can still be used without any restrictions.

Mono

The first four channel pairs of the MixDream XP Mk2 (1/2 to 7/8) can be switched from stereo to mono via the Mono switch (red status LED lights up). This is important for mono signals that should be positioned exactly in the center of the mix (kick, snare, lead vocal, bass, …). In stereo mode, the two channels are generally panned hard left/ right. This basic setting is useful for all stereo signals. Panorama settings and automation of the DAW remain perfectly unchanged.

-18 dB

The level of the last four channel pairs of the MixDream XP Mk2 (9/10 to 15/16) can be attenuated by 18 dB via the -18 dB switch (blue status LED lights up). Low level signals in the mix can thus be played back and get converted with a higher level, therefore with a higher digital resolution, from the DAW. This preserves more details and sonic characteristics.

Tip: This can work wonders for digital reverbs (especially plug-ins)!

Output

The Output control adjusts the output level of the MixDream XP Mk2. The control range can be set from -10 dB to +5 dB. 

With the output control a perfect control for following AD-converters can be performed. 

Since the main and monitor outputs are configured in parallel, the output control always affects both output pairs.

Variable Output

The output control is switched on or off with the Variable Output switch.

When the Variable Output switch is deactivated, the input level is maintained at 1:1 (Unity Gain).

Inputs

MixDream XP MK2 has 16 inputs with DB25 connectors. Here e.g. the analog outputs of a D/A converter, which plays the tracks to be summed out of the DAW are connected.

The DB25 sockets are assigned according to the Tascam standard.

Pin layout (Tascam standard) as pictured below:

Main Output

The Main Output sends the summed stereo mix. This signal can be fed back into the DAW via an A/D converter to get recorded there.

Monitor Output

The Monitor Output has electronically balanced XLR connectors. The Monitor Output is connected in parallel to the Master Output and provides the stereo mix for a monitoring controller or a pair of studio monitoring speakers.

Important: Since Main Output and Monitor Output are connected in parallel, using a non-balanced connection in one results in both outputs being unbalanced.

Expansion Input

If 16 channels are not enough when summing, another MixDream XP Mk2 can be connected to the Expansion Input.

The Expansion Input switch on the front of the MixDream XP Mk2 is used to switch the Expansion Input on or off.

Tip: The Expansion Input can also be used as an additional stereo input.

Tip: In addition to audio tracks from a DAW, samplers, drum computers, keyboards, synthesizers and expanders can of course also be connected directly to the MixDreamXP Mk2. To do this, simply create MIDI tracks in the DAW and connect the outputs of the sound processor directly to the MixDream XP Mk2.

Looks great, feels great –
and lasts for a lifetime

MixDream XP Mk2 has a 4 mm thick, black anodized aluminum front panel and aluminum knobs milled from solid. The housing is made of high-quality steel and is powder-coated in elegant black.

Sounds good

With all SPL devices we develop not only according to plan, but also by ear.
Many important components are installed on the circuit boards using Through-hole technology.
This way we can ensure that we can use the best sounding components.

Home is where the heart is

That’s why we manufacture all devices in our own production facility in Niederkrüchten on the Lower Rhine, Germany.

Manual

Specifications

Analog inputs & output; XLR & DB25 (balanced)

Maximum input & output gain
28 dBu
Input impedance
10
Output impedance
82 Ω
Common mode rejection (1 kHz, +10 dBu)
<70 dB
Frequency range
10 Hz – 200 kHz
THD + N (A-weighted, all channels active)
-95 dBu
Noise (A-weighted, all channels active)
-97 dBu
Crosstalk (1 kHz, +10dBu)
-90 dB
Dynamic range
125 dB

Internal Linear Power Supply with Shielded Toroidal Transformer

Operating voltage for analog audio
+/-30 V
Operating voltage for relays and LEDs
+12 V

Mains Power Supply

Mains voltage 230 V (selectable)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V
T 315 mA
Fuse for 115 V
T 630 mA
Power consumption
max. 30 VA

Dimensions & Weight

W x H x D (width x height x depth)
482 x 44 x 237 mm
19 x 1.73 x 9.33 inch
Unit weight
3.55 kg
7.83 lbs
Shipping weight (incl. packaging)
4.9 kg
10.8 lbs

Reference: 0 dBu = 0,775V. All specifications are subject to change without notice.

Other Summing & Mixing-Products

MixDream_front
MixDream
Class-A Summing Mixer
ProAudio
HiFi
ProAudio
HiFi

Calculation of VAT (value added tax)

All prices are displayed by default including the VAT of your country.

If your country cannot be determined via geolocation and you are not logged in as a user with the billing address of your country, the prices are displayed including the VAT of Germany (19%).

What does it actually mean …

In Stock!

The product is in stock in our warehouse in Niederkrüchten, Germany, and will be shipped the same or next working day.

We process the orders after receipt of the order and update the stock in the online shop regularly. If the product is no longer available at short notice due to high order volume, you naturally have the right to withdraw from the purchase (see Right of Withdrawal).

In any case, you will receive an e-mail with details of the delivery and the estimated delivery time.

Available soon!

The product is not in stock in our warehouse in Niederkrüchten, Germany. Usually it will be available again within 5 working days.

In any case, you will receive an e-mail with the details of the delivery and the estimated delivery time.

Of course you have the right to withdraw from your purchase (see Right of Withdrawal).

Currently unavailable.

This product is currently sold out and unavailable.

Was bedeutet eigentlich …

Auf Lager!

Das Produkt ist in unserem Lager Niederkrüchten vorrätig und wird noch am selben oder nächsten Werktag versendet.

Wir arbeiten die Bestellungen nach Bestelleingang ab und aktualisieren den Bestand im Online-Shop regelmäßig. Falls das Produkt wegen hohem Bestellaufkommens kurzfristig nicht mehr verfügbar ist, hast du selbstverständlich das Recht, vom Kauf zurückzutreten (siehe Widerrufbelehrung).

In jeden Fall erhältst du eine E-Mail mit den Einzelheiten der Lieferung und der voraussichtlichen Lieferzeit.

Bald verfügbar!

Das Produkt ist in unserem Lager Niederkrüchten nicht vorrätig. Gewöhnlich ist es innerhalb von 5 Werktagen wieder verfügbar.

Auf jeden Fall erhältst du eine E-Mail mit den Einzelheiten der Lieferung und der voraussichtlichen Lieferzeit.

Selbstverständlich hast du das Recht, vom Kauf zurückzutreten (siehe Widerrufbelehrung).

Zur Zeit nicht verfügbar.

Dieses Produkt ist derzeit ausverkauft und nicht verfügbar.

Events

Due to Covid19 there are no events scheduled at this time.

Events

Aufgrund von Covid19 sind derzeit keine Events geplant.

Anmelden